File:KitsapCabooseBatteryBox9.jpg
Jump to navigation
Jump to search
Size of this preview: 800 × 600 pixels. Other resolutions: 2,560 × 1,920 pixels | 3,264 × 2,448 pixels.
Original file (3,264 × 2,448 pixels, file size: 2.79 MB, MIME type: image/jpeg)
I used a low-cost sheet metal brake from Harbor Freight to bend all the roof sections. Here is the long roof section after begin cut in two parts. This is the longest section and the hardest to bend in this jig. I used all the C-clamps I could round up. The bending operation worked smother and easier by spraying lubricant (WD-40) on the sheet metal where it was begin bent. Photo by Daris A Nevil, June 2015.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 22:41, 13 September 2015 | | 3,264 × 2,448 (2.79 MB) | Dnevil (talk | contribs) | I used a low-cost sheet metal brake from Harbor Freight to bend all the roof sections. Here is the long roof section after begin cut in two parts. This is the longest section and the hardest to bend in this jig. I used all the C-clamps I could round... |
You cannot overwrite this file.
File usage
The following page uses this file:
