File:2020-11-28 12.16.06.jpg
Jump to navigation
Jump to search
Size of this preview: 450 × 600 pixels. Other resolution: 1,536 × 2,048 pixels.
Original file (3,024 × 4,032 pixels, file size: 5.56 MB, MIME type: image/jpeg)
Step 2: Clamp the third tie from each end in place. Use two screws to fasten a rail in the middle of the tie plate. Start at one of the clamped ties. Tighten the screws on each tie, making sure the tie is touching the tie stop on the jig. Photo by Daris A Nevil, November 2020.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 17:45, 29 November 2020 | | 3,024 × 4,032 (5.56 MB) | Dnevil (talk | contribs) | Step 2: Clamp the third tie from each end in place. Use two screws to fasten a rail in the middle of the tie plate. Start at one of the clamped ties. Tighten the screws on each tie, making sure the tie is touching the tie stop on the jig. Photo by... |
You cannot overwrite this file.
File usage
The following page uses this file:
