File:2014-03-29 16.41.11.jpg
Jump to navigation
Jump to search
Size of this preview: 450 × 600 pixels. Other resolution: 2,448 × 3,264 pixels.
Original file (2,448 × 3,264 pixels, file size: 1.79 MB, MIME type: image/jpeg)
What kind of cutter is this? Here is a trick l learned from an experienced machinist. The surplus store where I purchase tools did not have a cutting tool with the proper diameter for the flanges. The machinist said "you have to improvise with what you have", and suggested I use a corner milling bit with the correct diameter. Sure enough it works great! The final cuts of the tread and the shaping of the flange were done at 300 rpm. Photo by Daris A. Nevil, 2014.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 23:35, 30 March 2014 | 2,448 × 3,264 (1.79 MB) | Dnevil (talk | contribs) | What kind of cutter is this? Here is a trick l learned from an experienced machinist. The surplus store where I purchase tools did not have a cutting tool with the proper diameter for the flanges. The machinist said "you have to improvise with what you... |
You cannot overwrite this file.
File usage
The following page uses this file: