Building a Kitsap Caboose

From IBLS
Revision as of 23:41, 14 June 2015 by Dnevil (talk | contribs) (Created page with "Category:Construction <gallery widths="400px" heights="400px"> File:Kitsap Live Steamers Caboose 1.jpg|Laying out the base and other parts for the [[Kitsap Live Steamers]...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


  • Laying out the base and other parts for the Kitsap Live Steamers caboose kit. Photo by Daris A Nevil, April 2015.

    Laying out the base and other parts for the Kitsap Live Steamers caboose kit. Photo by Daris A Nevil, April 2015.

  • The floor plats have been welded to the side beams. The center beam and bolster supports have been attached as well. The end beam has been welded to the end of the floor and the coupler pocket. The half rounds were previously brazed on the end beam.

    The floor plats have been welded to the side beams. The center beam and bolster supports have been attached as well. The end beam has been welded to the end of the floor and the coupler pocket. The half rounds were previously brazed on the end beam.

Retrieved from "http:///mediawiki/index.php?title=Building_a_Kitsap_Caboose&oldid=6870"