William Morewood: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Category:People") |
No edit summary |
||
Line 1: | Line 1: | ||
[[Category:People]] | [[Category:People]] | ||
== American 4-4-0 == | |||
An American Souvenir | |||
<i>[[The Miniature Locomotive]]</i>, November-December 1954 | |||
Bill Morewood built this 3/4 inch American type from an old Baldwin drawing and the locomotive first pulled a load successfully last fall (1953) at the club track of the [[Pennsylvania Live Steamers]]. Picture shown was taken at that time. | |||
Cylinders have bore of 3/4 inch, stroke of 1-1/4 inch, drivers 4 inches. Stephenson valve gear is used. Boiler 1/16 inch copper with 13-5/16 inch outside diameter flues and one 5/8 inch superheader flue. Grate measures 1-1/2 inch by 3-5/8 inch. | |||
Feedwater is supplied by two crosshead pumps with 3/32 inch diameter plungers or by a hand pump in the tender. The owner is from Doylestown, Pennsylvania. | |||
[[File:BillMoorewood American 440 1953.jpg|thumb|center|300px|Bill Moorewood and his American 4-4-0 at the Pennsylvania Live Steamers Fall Meet 1953.]] |
Revision as of 22:42, 10 June 2014
American 4-4-0
An American Souvenir
The Miniature Locomotive, November-December 1954
Bill Morewood built this 3/4 inch American type from an old Baldwin drawing and the locomotive first pulled a load successfully last fall (1953) at the club track of the Pennsylvania Live Steamers. Picture shown was taken at that time.
Cylinders have bore of 3/4 inch, stroke of 1-1/4 inch, drivers 4 inches. Stephenson valve gear is used. Boiler 1/16 inch copper with 13-5/16 inch outside diameter flues and one 5/8 inch superheader flue. Grate measures 1-1/2 inch by 3-5/8 inch.
Feedwater is supplied by two crosshead pumps with 3/32 inch diameter plungers or by a hand pump in the tender. The owner is from Doylestown, Pennsylvania.