Taper pin: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 77: | Line 77: | ||
|0.1094 | |0.1094 | ||
|0.1406 | |0.1406 | ||
|1- | |1-3/4 | ||
|- | |- | ||
|#3 | |#3 |
Revision as of 22:52, 13 August 2014
No. of Taper Pin | Diameter Large End D | Approx. Size D | 1st Drill thru size | Second Drill | |
---|---|---|---|---|---|
Size | Depth | ||||
#7/0 | 0.0625 | 1/16 | 0.0469 | ||
#6/0 | 0.078 | 5/64 | 0.0469 | ||
#5/0 | 0.094 | 3/32 | 0.0625 | ||
#4/0 | 0.109 | 8/64 | 0.0781 | ||
#3/0 | 0.125 | 1/8 | 0.0938 | ||
#2/0 | 0.141 | 9/64 | 0.0938 | 0.1094 | 1-1/4 |
#0 | 0.156 | 5/32 | 0.0938 | 0.1250 | 1-1/2 |
#1 | 0.172 | 11/64 | 0.1094 | 0.1406 | 1-1/2 |
#2 | 0.193 | 3/16 | 0.1094 | 0.1406 | 1-3/4 |
#3 | 0.219 | 7/32 | 0.1406 | 0.1719 | 1-3/4 |
#4 | 0.250 | 1/4 | 0.1719 | 0.2031 | 1-3/4 |