File:KenSmith RailJoinerGauge 2020-12-15 16.29.12.jpg: Difference between revisions

From IBLS
Jump to navigation Jump to search
No edit summary
 
No edit summary
 
Line 1: Line 1:
 
A simple rail joiner gauge can be made by drilling a hole in the center of two rail joiners, then attaching them together with screws, washers and nuts.  Photo by Ken Smith, December 2020.

Latest revision as of 14:56, 17 December 2020

A simple rail joiner gauge can be made by drilling a hole in the center of two rail joiners, then attaching them together with screws, washers and nuts. Photo by Ken Smith, December 2020.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current14:55, 17 December 2020Thumbnail for version as of 14:55, 17 December 20202,560 × 1,920 (857 KB)Dnevil (talk | contribs)

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http:///mediawiki/index.php?title=File:KenSmith_RailJoinerGauge_2020-12-15_16.29.12.jpg&oldid=15853"