Diamond: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(→CIG) |
||
| Line 6: | Line 6: | ||
Ken Smith built this [[Diamond|diamond]] for the [[Comanche & Indian Gap Railroad]]. He used flat bar for all components, with the exception of the short section of steel rail as a transition between the diamond and the aluminum rail. | Ken Smith built this [[Diamond|diamond]] for the [[Comanche & Indian Gap Railroad]]. He used flat bar for all components, with the exception of the short section of steel rail as a transition between the diamond and the aluminum rail. | ||
Here is the material list used for constructing the diamond (either [[HRS]] or [[CRS]]): | |||
* 1/2 by 1 inch flat | |||
* 1/4 by 3/4 inch flat | |||
* 1/8 by 1 inch flat | |||
* 2 by 1/8 inch flat | |||
* 1 by 1 inch angle | |||
<gallery widths=300px heights=300px perrow=2> | <gallery widths=300px heights=300px perrow=2> | ||
Revision as of 20:48, 29 May 2021
Examples
CIG
Ken Smith built this diamond for the Comanche & Indian Gap Railroad. He used flat bar for all components, with the exception of the short section of steel rail as a transition between the diamond and the aluminum rail.
Here is the material list used for constructing the diamond (either HRS or CRS):
- 1/2 by 1 inch flat
- 1/4 by 3/4 inch flat
- 1/8 by 1 inch flat
- 2 by 1/8 inch flat
- 1 by 1 inch angle
